DVI to DFP Adaptor Lead

Product Selection Menu

41220 | 20cm DVI to DFP MDR20 Video Monitor Adaptor Lead

Average ETA for Additional Units Discontinued
Product Datasheet Download

DVI (Digital Visual Interface) uses a DVI connector, which allows digital or analogue signal transfer. It incorporates a second digital link (Dual Link) which allows resolutions up to 1920 x 1080.

DFP MDR20 (Digital Flat Panel) interface uses an MDR20 (Micro Delta Ribbon) connector, which allows only digital signal transfer. It is restricted to resolutions up to 1280 x 1024.

  • Connector 1: DVI-D (Digital) Male 
  • Connector 2: MDR20 Female
  • EMC (Electromagnetic Compatibility) shielded - Patent pending RF-BLOK shielded design giving:
  • Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
  • Increased insulation resistance up to 25%
  • No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
  • Tight fit of internal wires as there is no inner mould
  • No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
  • Smaller overall dimensions which allows more room behind the host or peripheral
  • Increased connectivity - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one 
  • Material: PVC
  • Colour: White
  • Length: 20cm